An NFL passer rating is calculated by taking four per-attempt passing statistics (completion percentage, yards per attempt, touchdown percentage, and interception percentage) and converting each one into a scaled score between 0.000 and 2.375. You add those four component scores together, divide the total by 6, and multiply by 100 to get a final rating on a scale from 0.0 to 158.3. Because each of the four categories hits a hard ceiling at 2.375, the highest combined total a quarterback can reach before dividing by 6 is 9.500, which produces the 158.3 maximum score.
How does the NFL passer rating formula work step by step?
The league adopted its current system in 1973 after Don Smith of the Pro Football Hall of Fame and Seymour Siwoff of the Elias Sports Bureau designed a fixed statistical standard using data from qualified pro passers between 1960 and 1970, according to the Hall of Fame’s 2005 documentation of the National Football League Record and Fact Book. Before 1973, the league crowned passing leaders using total yardage (1932 to 1937), completion percentage (1938 to 1940), yards per attempt (1941 to 1960), and comparative rankings against contemporary league leaders (1961 to 1972). The 1973 formula replaced peer rankings with a permanent baseline so quarterbacks from any season are measured against the same mathematical standard.
To run the calculation, you need five raw passing totals from the box score: pass attempts (ATT), completions (CMP), passing yards (YDS), touchdown passes (TD), and interceptions (INT), as outlined by Pro Football Reference in 2025. Because every input is divided by pass attempts, a quarterback gets credit for efficiency per throw rather than raw volume. Follow these six steps in order:
- Calculate Component A (Completion Percentage): Divide completions by pass attempts, subtract 0.3, and multiply that result by 5, written as ((CMP / ATT) – 0.3) x 5. If you express completion rate as a whole percentage such as 65.0, subtract 30 and multiply by 0.05.
- Calculate Component B (Yards per Attempt): Divide total passing yards by pass attempts, subtract 3.0, and multiply that result by 0.25, written as ((YDS / ATT) – 3.0) x 0.25.
- Calculate Component C (Touchdown Percentage): Divide touchdown passes by pass attempts and multiply by 20, written as (TD / ATT) x 20. Using a whole-number touchdown percentage, multiply that figure by 0.2.
- Calculate Component D (Interception Percentage): Divide interceptions by pass attempts, multiply that ratio by 25, and subtract the result from 2.375, written as 2.375 – ((INT / ATT) x 25). Using a whole-number interception percentage, multiply by 0.25 and subtract that product from 2.375.
- Apply the 0.000 floor and 2.375 ceiling: Check each of the four component scores individually before adding them. If any component is less than 0.000, set that component to 0.000; if any component is greater than 2.375, set that component to 2.375.
- Compute the final rating: Add the four bounded components together, divide their sum by 6, multiply by 100, and round to one decimal place, written as ((A + B + C + D) / 6) x 100.
When Smith and Siwoff calibrated the scale for the 1973 rulebook, a score of 1.000 in each category represented the 1960 to 1970 pro average, which produces a 66.7 overall rating (4.000 divided by 6, times 100), according to the Pro Football Hall of Fame (2005). A score of 2.000 in all four categories represented an exceptional game or season, corresponding to a 70.0 percent completion rate, 11.0 yards per attempt, a 10.0 percent touchdown rate, and a 1.5 percent interception rate for an overall rating of 133.3.
What stats do you need for a 158.3 or 0.0 rating?
Reaching a perfect 158.3 requires hitting the 2.375 cap in all four statistical categories at the same time, according to the Pro Football Hall of Fame (2005) and Wikipedia (2025). Because no category can exceed 2.375, running up extra yards or touchdowns cannot compensate for falling short in another category.
- Completion percentage for 2.375: At least 77.5 percent of pass attempts completed, because (77.5 – 30) x 0.05 equals 2.375.
- Yards per attempt for 2.375: At least 12.5 passing yards per attempt, because (12.5 – 3.0) x 0.25 equals 2.375.
- Touchdown percentage for 2.375: A touchdown pass on at least 11.875 percent of attempts (at least one touchdown for every 8.421 pass attempts), because 11.875 x 0.2 equals 2.375.
- Interception percentage for 2.375: Zero interceptions, because Component D starts at 2.375 and subtracts 25 times the interception-per-attempt ratio.
That fourth requirement creates one of the strictest rules in football statistics. If a quarterback throws even one interception, Component D drops below 2.375, making a 158.3 rating mathematically impossible for that game or season regardless of how many touchdowns they throw.
At the opposite end of the scale, earning a 0.0 rating requires hitting the 0.000 floor in every category, per the Pro Football Hall of Fame (2005) and Wikipedia (2025). A passer records a 0.0 only when they finish with a completion rate of 30.0 percent or lower, an average of 3.0 yards per attempt or fewer, zero touchdown passes, and an interception rate of 9.5 percent or higher (at least one interception for every 10.526 pass attempts). Because the formula replaces negative component numbers with 0.000, an NFL rating can never drop below zero.
How do you calculate passer rating for a real NFL season?
To see how the four components interact in practice, take Peyton Manning’s 2004 regular-season passing line, which the Pro Football Hall of Fame (2005) uses as the official worked example from the National Football League Record and Fact Book. In that season, Manning recorded 497 pass attempts, 336 completions, 4,557 passing yards, 49 touchdown passes, and 10 interceptions.
First, convert completions into Component A. Dividing 336 completions by 497 attempts gives a 67.60 percent completion rate. Subtracting 30 from 67.60 leaves 37.60, and multiplying 37.60 by 0.05 produces a score of 1.880. Next, calculate Component B from the yardage total. Dividing 4,557 yards by 497 attempts equals 9.17 yards per attempt; subtracting 3.0 leaves 6.17, and multiplying 6.17 by 0.25 rounds to 1.543.
For Component C, divide 49 touchdowns by 497 attempts to get a 9.86 percent touchdown rate, then multiply 9.86 by 0.2 to get 1.972. For Component D, divide 10 interceptions by 497 attempts for a 2.01 percent interception rate, multiply 2.01 by 0.25 to get 0.503, and subtract 0.503 from 2.375 to leave 1.872. Since all four scores (1.880, 1.543, 1.972, and 1.872) sit between 0.000 and 2.375, none of the caps apply. Adding the four components yields 7.267, dividing by 6 gives 1.211, and multiplying by 100 produces a season rating of 121.1.
Two common calculation mistakes trip fans up when checking box scores by hand. First, skipping Step 5 and adding uncapped components together distorts the score whenever a quarterback has a huge big-play game; averaging 15.0 yards per attempt produces 3.000 before capping, which must be trimmed to 2.375 before you divide by 6. Second, many fans assume a completed touchdown pass always raises a quarterback’s rating. If a passer holds a 158.3 rating and completes an 8-yard touchdown pass that pulls their overall average below 12.5 yards per attempt, Component B drops below 2.375 and their passer rating goes down on a scoring play.
What does passer rating leave out compared to college and modern stats?
The NFL rulebook states that its formula measures passing efficiency rather than complete quarterback play, according to the Pro Football Hall of Fame (2005). Rushing yards, rushing touchdowns, fumbles, and sacks taken are excluded from the five inputs. A quarterback who scrambles for a 40-yard touchdown or takes four third-down sacks sees zero change in their passer rating because neither play counts as a forward pass attempt.
Because the 1973 formula locks in the 1960 to 1970 era as its fixed baseline, rule changes favoring passing offenses have pushed average numbers higher over time. League-wide average passer rating rose from 61.7 in 1973 to 88.6 in 2017 and 93.6 in 2020, according to Wikipedia (2025) and NFL data. To account for situational football and era shifts, analysts and leagues use three alternative systems:
- NFL Next Gen Stats Passing Score: Introduced in 2022 on a 50 to 99 scale, the NFL Next Gen Stats model isolates passing from team factors by weighting Expected Points Added Over Expected (46 percent), Expected Points Added (18 percent), Completion Percentage Over Expected (11 percent), Interception Probability (11 percent), Air EPA (7 percent), and Expected Air EPA (7 percent).
- ESPN Total Quarterback Rating (QBR): Introduced for NFL seasons from 2006 onward on a 0 to 100 scale where 50 is average, Total QBR folds in rushing plays, sacks, fumbles, penalties, and down-and-distance win probability.
- NCAA Passing Efficiency: Adopted across all college divisions in 1979 per NCAA Football Bowl Subdivision records (2020), college football uses a single uncapped equation: ((8.4 x YDS) + (330 x TD) + (100 x CMP) – (200 x INT)) / ATT. With no component floors or ceilings, college scores can theoretically range from -731.6 to 1,261.6, according to Had2Know (2024). On Aaron Rodgers’ 2004 junior-college line of 209 completions on 316 attempts for 2,566 yards, 24 touchdowns, and 8 interceptions, the NFL formula yields 105.8 while the NCAA formula produces 154.35, according to Omni Calculator (2024).
Frequently asked questions
How many pass attempts qualify a quarterback for official NFL leaderboards?
Any player who throws at least one pass receives a game or season rating, but official NFL record qualifications (2021) require a minimum of 14 pass attempts per scheduled team game to qualify for the single-season passing title, which equals 238 attempts in a 17-game season (or 224 attempts in a 16-game season). According to Wikipedia (2025), the league requires at least 1,500 career pass attempts to qualify for the all-time career leaderboard, and since 1978 it has required at least 14 attempts in a single game to qualify for an official perfect 158.3 game record.
Does the Canadian Football League use the same passer rating formula?
Yes. The Canadian Football League (CFL) calculates quarterback passer rating using the exact same four-component equations, 0.000 to 2.375 bounds, and 0.0 to 158.3 scale as the NFL, according to Omni Calculator (2024) and Wikipedia (2025).
How does Passer Rating Index compare quarterbacks from different eras?
Pro Football Reference (2025) publishes a metric called Passer Rating Index (rate+) for quarterbacks with at least 14 attempts per scheduled game. It compares a quarterback’s rating against a three-year rolling league average centered on that season, setting 100 as league average and scaling each standard deviation above or below average to 15 index points.

