Why Do Tropical Cyclones Recurve in the Bay of Bengal?

Tropical cyclones recurve in the Bay of Bengal when they drift toward the northern edge of a high-pressure belt called the subtropical ridge and get caught in mid-latitude westerly winds blowing from west to east. After tropical easterly trade winds and the Earth’s rotation initially push a storm west-northwest, an approaching upper-level westerly trough erodes the ridge and steers the middle and upper layers of the cyclone (between 500 and 300 hectopascals, or hPa) toward the north and northeast.

Although meteorologists once treated recurvature as an unusual detour from a normal westward track, a 2021 Royal Meteorological Society study by researchers at Bangladesh University of Engineering and Technology and Nagoya University found that more than half of all tropical cyclones in the Bay of Bengal between 1990 and 2019 recurved. Understanding what causes a spinning storm to pivot toward eastern India, Bangladesh or Myanmar requires looking at how winds at different altitudes push and tilt the vortex.

How do steering winds and the Coriolis force set a cyclone’s path?

A tropical cyclone does not choose its own path across the ocean. Like a spinning whirlpool carried along by a river current, a cyclone moves with the large-scale surrounding wind field, which meteorologists call the environmental steering flow. According to forecasting material from the World Meteorological Organization and the US National Hurricane Center (2021), forecasters measure this steering flow across three atmospheric pressure bands depending on how tall and intense the storm is:

  • Shallow-layer steering spans 850 to 700 hPa (roughly 1.5 to 3 kilometers above sea level) and guides weaker depressions whose clouds have not yet punched high into the atmosphere.
  • Medium-layer steering spans 850 to 400 hPa (roughly 1.5 to 7 kilometers up) and guides moderate cyclonic storms.
  • Deep-layer steering spans 850 to 200 hPa (roughly 1.5 to 12 kilometers up) and controls severe cyclones whose thunderstorms reach the top of the troposphere.

When a disturbance forms over the warm waters of the southern or central Bay of Bengal between 5°N and 15°N latitude, where sea surface temperatures stay above 28°C, it sits south of the subtropical ridge. In this tropical belt, persistent easterly trade winds blow from east to west, steering the storm westward or west-northwestward toward the eastern coastline of India.

Even if those background steering winds were completely calm, a cyclone in the Northern Hemisphere would still creep northwest on its own. Because the Earth is a sphere, the Coriolis force (the apparent deflection of moving air caused by the planet’s rotation) grows stronger the closer you get to the poles. Across the width of a cyclone, air on the northern side experiences a stronger Coriolis pull than air on the southern side. That imbalance creates a pair of secondary circulation cells called Beta Gyres, which generate a self-induced northwestward motion known as Beta Drift of 2 to 4 knots, or about 0.7 meters per second (World Meteorological Organization and NOAA National Hurricane Center, 2021).

How do the subtropical ridge and westerly troughs trigger a turn?

The steady northwestward march breaks down when the cyclone climbs high enough in latitude to reach the western edge or a weak spot in the subtropical ridge. In the Northern Hemisphere, winds circulate clockwise around a high-pressure ridge. South of the ridge axis, air flows from east to west; along its western flank, air turns northward; north of the ridge axis, mid-latitude westerlies (prevailing winds between 30°N and 60°N) blow from west to east.

Recurvature most often begins when a mid-latitude westerly trough (an elongated dip of low pressure in the upper atmosphere) digs southward over northern and central India. As the trough approaches the Bay of Bengal, it weakens and splits the subtropical high-pressure ridge. According to the 2021 Royal Meteorological Society study, steering flows in the middle and upper troposphere between 500 and 300 hPa (roughly 5.5 to 9 kilometers in altitude) are the primary driver that pulls Bay of Bengal storms into a curve.

When a cyclone reaches the latitude of the steering ridge axis, often between 14°N and 25°N depending on the month, opposing wind currents cancel each other out. You will notice on satellite loops that the storm’s forward speed drops sharply and the center appears to stall or wobble for several hours. Once the cyclone crosses north of the ridge axis, the southwesterly and westerly winds ahead of the approaching trough grab the upper column of the vortex and accelerate it toward the north-northeast in a parabolic arc (India Meteorological Department, 2013; American Meteorological Society, 2013).

Because the Coriolis force acts in the opposite direction south of the equator, this parabolic path flips by hemisphere. In the Northern Hemisphere, including the Bay of Bengal and the Arabian Sea, typical recurvature bends a storm clockwise from a northwestward path to a northeastward path. In the Southern Hemisphere, cyclones rotate clockwise and recurve counterclockwise, turning from a westward path toward the south and southeast (PMF IAS, 2024).

How do dry air masses and vertical wind shear reshape the track?

A common misconception is that the curved coastline of India physically bounces an approaching cyclone back out to sea. In reality, a cyclone changes direction hundreds of kilometers offshore because of invisible boundaries between contrasting air masses in the middle atmosphere.

During the pre-monsoon season, hot and dry northwesterly winds blowing off the Indian landmass collide with warm, moist southwesterly air rising from the equatorial Indian Ocean. The boundary between these two air masses forms a sharp moisture gradient called a dryline. Because a tropical cyclone relies on warm, humid air to fuel condensation and thunderstorm updrafts, the dense, dry continental air acts as a wall that blocks the storm from moving inland, forcing it to slide northeastward parallel to the coast (Quarterly Journal of the Royal Meteorological Society, 2021).

Cyclone Roanu in May 2016 demonstrated how tightly a dryline can guide a storm. As Roanu tracked up the western side of the Bay of Bengal, hot northwesterly air over India prevented it from moving deeper inland. Instead, the cyclone recurved northeastward along the moisture boundary toward Bangladesh, keeping its eye at a nearly constant distance of about 400 kilometers from the dryline throughout its trek (Quarterly Journal of the Royal Meteorological Society, 2021).

Along that dryline and near the monsoon trough, strong vertical wind shear (a change in wind speed or direction with altitude) exceeding 30 meters per second also shapes the storm’s movement. High wind shear tilts the cyclone’s upper-level anticyclone downward in the direction of the shear vector, which helps pull the lower vortex forward along the recurving track. However, vertical wind shear is a double-edged sword. Another widespread misconception is that recurving cyclones always intensify before landfall. When vertical wind shear between 850 and 200 hPa becomes too severe and dry mid-tropospheric air wraps into the core, it strips away deep thunderstorm clouds and causes the storm to step down the cyclone intensity classification scale even over warm water.

Very Severe Cyclonic Storm Madi in December 2013 is one of the clearest examples of both an unusual left-hand recurvature and shear-driven collapse. After travelling northward across the Bay of Bengal with sustained winds reaching the 64 to 119 knot threshold for a very severe cyclonic storm (World Meteorological Organization, 2007), Madi reached the steering ridge near 14°N. Instead of turning northeast, an intense upper-level westerly jet combined with low-level northeasterly winds to force a nearly 150- to 180-degree turnaround toward the southwest. According to a 2015 analysis by India Meteorological Department scientists in Tropical Cyclone Research and Review, strong 850 to 200 hPa vertical wind shear and dry air intrusion weakened Madi into a depression (17 to 27 knots) over open ocean within 24 hours of its turn.

When do cyclones recurve in the Bay of Bengal most often?

The Bay of Bengal experiences two distinct cyclone seasons each year: the pre-monsoon season in April and May, and the post-monsoon season from October to December (World Meteorological Organization, 2007). Long-term climatological data from 1891 to 2025 maintained in the RSMC New Delhi records by the India Meteorological Department show that the probability of a cyclone recurving toward the northeast is highest during the pre-monsoon months of April and May.

In April and May, the subtropical ridge sits further south and mid-latitude westerly troughs frequently sweep across northern India, creating an atmospheric corridor that funnels storms toward the northeast. As a result, pre-monsoon cyclones predominantly curve right and make landfall in Bangladesh or Myanmar, such as Very Severe Cyclonic Storm Mala in April 2006 and Cyclone Roanu in May 2016. By contrast, post-monsoon storms in October, November and December face a wider variety of steering currents. While many post-monsoon cyclones cross the east coast of India, others curve north, northeast or even southwest. According to a 2017 India Meteorological Department report, Very Severe Cyclonic Storm Vardah in December 2016 became the fourth consecutive Bay of Bengal cyclone in a single calendar year to follow a recurving track, after Cyclones Roanu, Kyant and Nada.

Historical tracking between 1891 and 2019 documented 25 recurved Bay of Bengal tropical cyclones that struck coastal Bangladesh, with more landfalls on the country’s southwest coast than its southeast coast (2021 Bangladesh recurvature climatology study). Researchers are still investigating how long-term climate warming affects these tracks. A 2019 study published by the Indian Academy of Sciences in the Journal of Earth System Science found that a weakening subtropical high and increased mid-latitude westerly trough activity have contributed to a northward and northeastward shift in Bay of Bengal tracks and more landfalls in Bangladesh. Because natural multi-decadal wind cycles also alter steering patterns, atmospheric scientists continue to study how much of the shift comes from human-driven warming versus natural variability.

Frequently asked questions

Why are recurving cyclones harder for weather models to predict?

When a cyclone approaches the axis of the subtropical ridge, the background steering winds weaken and the storm slows down before entering the mid-latitude westerlies. According to a 2013 study in the American Meteorological Society’s Journal of Applied Meteorology and Climatology, small errors in how computer models estimate the strength of the upper-tropospheric ridge or the speed of an approaching westerly trough produce large differences in whether a storm turns early out to sea or continues straight into the coast.

Can two cyclones in the same region cause each other to change course?

Yes. When two cyclonic vortices spin close enough to interact, their wind fields tug on one another in a process called the Fujiwhara effect. Instead of following the background steering winds alone, the two storms begin orbiting a shared center between them, which can deflect one or both cyclones onto a recurving path (Compass by Rau’s IAS, 2024).

Recent Articles

Related News

Leave A Reply

Please enter your comment!
Please enter your name here